§ 134-19. Manufactured home stands.

A. 

Area. The area of the manufactured home stand shall be improved to provide an adequate foundation as set forth in the New York State Uniform Fire Prevention and Building Code for construction, installation, placement and tie-down of the manufactured home, thereby securing the superstructure against uplift, sliding, rotation and overturning.

B. 

Stand. The manufactured home stand shall not heave, shift or settle unevenly under the weight of the manufactured home due to frost action, inadequate drainage, vibration or other forces acting upon the superstructure.

C. 

Anchors and tie-downs. The manufactured home stand shall be provided with anchors and tie-downs, such as cast-in-place concrete dead-men eyelets embedded in concrete foundations or runways, screw augers, arrowhead anchors or other devices securing the stability of the manufactured home to the installation standards specified in the design criteria for the unit. Where design criteria is not available, then the standards specified in the New York State Fire Prevention and Building Code shall apply.